Synthesis,Crystal Structure,and Properties of the 3D Porous Framework [Zn(INAIP)]·DMA·H2O

A new three‐dimensional (3D) porous framework [Zn(INAIP)] · DMA · H₂O ( 1 ) [INAIP = 5‐(isonicotinamido)isophthalate, DMA = N,N′‐dimethylacetamide] was synthesized by solvothermal methods and characterized by single‐crystal and powder X‐ray diffraction, as well as thermogravimetric analysis. The results of X‐ray diffraction analyses revealed that complex 1 has an unusual 3D architecture with the (3,6)‐connected rutile ( rtl ) topology. The adsorption behavior shows that compound 1 exhibits selective adsorptions of CO₂ over N₂ after the removal of the solvent molecules within the pores.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

Convenient Synthesis of Terminal Alkynes from anti‐3‐Aryl‐2,3‐dibromopropanoic Acids Using a K2CO3/DMSO System

A convenient, efficient, and generally applicable method was developed for the synthesis of terminal alkynes from anti‐3‐aryl‐2,3‐dibromopropanoic acids in the presence of DMSO and K₂CO₃.     

Iron-catalyzed bromination of aryl azides by N-bromosuccinimide:Efficient method for the synthesis of brominated aryl azides

An efficient and mild protocol for bromination of aryl azides with N-bromosuccinimide（NBS） under FeCl₃ catalysis in 1,2- dichloroethane was developed.It is proved to be an efficient method for obtaining brominated aryl azides.     

Light-Induced Chiral Iron Copper Selenide Nanoparticles Prevent β-Amyloidopathy In Vivo

The accumulation and deposition of β-amyloid (Aβ) plaques in the brain is considered a potential pathogenic mechanism underlying Alzheimer's disease (AD). Chiral l/d -Fe_xCu_ySe nanoparticles (NPs) were fabricated that interfer with the self-assembly of Aβ42 monomers and trigger the Aβ42 fibrils in dense structures to become looser monomers under 808 nm near-infrared (NIR) illumination. d -Fe_xCu_ySe NPs have a much higher affinity for Aβ42 fibrils than l -Fe_xCu_ySe NPs and chiral Cu_2−xSe NPs. The chiral Fe_xCu_ySe NPs also generate more reactive oxygen species (ROS) than chiral Cu_2−xSe NPs under NIR-light irradiation. In living MN9D cells, d -NPs attenuate the adhesion of Aβ42 to membranes and neuron loss after NIR treatment within 10 min without the photothermal effect. In-vivo experiments showed that d -Fe_xCu_ySe NPs provide an efficient protection against neuronal damage induced by the deposition of Aβ42 and alleviate symptoms in a mouse model of AD, leading to the recovery of cognitive competence.     

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers as a Waterproof Structural Material†

Lightweight structural materials are important for the energy efficiency of applications, particularly those in the building sector. Here, inspired by nature, we developed a strong, superhydrophobic, yet lightweight material by simple in situ growth of nano‐SiO₂ and subsequent densification of the wood substrate. In situ generation of SiO₂ nanoparticles both inside the wood channels and on the wood surfaces gives the material superhydrophobicity, with static and dynamic contact angles of 159.4^o and 3^o, respectively. Densification of the wood to remove most of the spaces among the lumen and cell walls results in a laminated, dense structure, with aligned cellulose nanofibers, which in turn contributes to a high mechanical strength up to 384.2 MPa (7‐times higher than natural wood). Such treatment enables the strong and superhydrophobic wood (SH‐Wood) to be stable and have excellent water, acid, and alkaline resistance. The high mechanical strength of SH‐Wood combined with its excellent structural stability in harsh environments, as well its low density, positions the strong and superhydrophobic wood as a promising candidate for strong, lightweight, and durable structural materials that could potentially replace steel.     

Studies of Synergism in Binary Alkylbenzene Sulfonate Mixtures for Producing Low Interfacial Tensions at Oil/Water Interface

In order to study the synergism between alkybenzene sulfonate and alkybenzene sulfonate, five di-n-alkylbenzene sulfonates were used and the interfacial tensions of single sulfonates and their binary mixtures against a series of alkane homologues were measured. The effects of hydrophilic-lipophilic abilities of sulfonates and mixing ratio on synergism were discussed. It is revealed that the synergistic mechanism derives from the amelioration of the hydrophilic-lipophilic ability of the surfactant system, and the method to achieve synergism is adding the hydrophilic alkybenzene sulfonate to the lipophilic alkylbenzene sulfonate, and ultralow interfacial tensions can be obtained in proper mixing ratios. The results are useful for enhanced oil recovery.      

Physical variational principle and thin plate theory in electro-magneto-elastic analysis

Under the assumption of the quasi-static electric and magnetic fields the electro-magneto-elastic analysis including medium and its environment is studied in this paper. The complete governing equations under the finite deformation can be derived from the physical variational principle. In the physical variational principle the variations of the electric potential and magnetic potential are divided into local variations and migratory variations. From the virtual change of the sum of the electromagnetic energy and the couple energy produced by the migratory variation we can get the electromagnetic force and in this case the virtual variation of the volume should be considered. It is also found that the Maxwell stress is directly related to the strain in a material with piezoelectric or piezomagnetic behavior for the finite deformation case. The thin plate theory in first order is derived from the general theory in this paper and the Maxwell stress is naturally included in the governing equations.     

Light‐Induced Chiral Iron Copper Selenide Nanoparticles Prevent β‐Amyloidopathy In Vivo

The accumulation and deposition of β‐amyloid (Aβ) plaques in the brain is considered a potential pathogenic mechanism underlying Alzheimer's disease (AD). Chiral l/d ‐Fe_xCu_ySe nanoparticles (NPs) were fabricated that interfer with the self‐assembly of Aβ42 monomers and trigger the Aβ42 fibrils in dense structures to become looser monomers under 808 nm near‐infrared (NIR) illumination. d ‐Fe_xCu_ySe NPs have a much higher affinity for Aβ42 fibrils than l ‐Fe_xCu_ySe NPs and chiral Cu_2?xSe NPs. The chiral Fe_xCu_ySe NPs also generate more reactive oxygen species (ROS) than chiral Cu_2?xSe NPs under NIR‐light irradiation. In living MN9D cells, d ‐NPs attenuate the adhesion of Aβ42 to membranes and neuron loss after NIR treatment within 10 min without the photothermal effect. In‐vivo experiments showed that d ‐Fe_xCu_ySe NPs provide an efficient protection against neuronal damage induced by the deposition of Aβ42 and alleviate symptoms in a mouse model of AD, leading to the recovery of cognitive competence.